ترك رسالة
إذا كنت مهتمًا بمنتجاتنا وترغب في معرفة المزيد من التفاصيل، فيرجى ترك رسالة هنا، وسنرد عليك في أقرب وقت ممكن.
The Siemens QAE2174.015 is an active immersion temperature sensor from the Symaro series, designed for measuring water temperature in pipes and tanks within HVAC and building automation systems . It is specifically configured for DC 13.5…35 V supply (DC-only, not AC) and provides a 4…20 mA linear output signal corresponding to a factory-set measuring range of -10…120 °C.
The sensor uses a Pt 1000 Class B sensing element per DIN EN 60 751, housed in a 150 mm stainless steel immersion rod with a G ½" process connection . It is a current, active product (PLM status PM300) with a standard factory lead time of approximately 1 day.
رقم الصنف :
QAE2174.015الطلب (الحد الأدنى للكمية) :
1قسط :
EXWمنشأ المنتج :
Germanyميناء الشحن :
Wuhan, Hubei, Chinaمهلة :
3-5 daysوزن :
0.168kgOverview
QAE2174.015 SIMATIC PLC Module
New in stock
Origin from Germany
Payment Method: TT.Western Union
Shipping Method: DHL\UPS\Fedex\EMS\Others
More Brands
| Part Number | Description | Key Difference |
|---|---|---|
| QAE2174.015 | 150 mm, DC 13.5-35V, 4-20mA (this item) | Standard 150 mm length |
| QAE2174.010 | 100 mm, DC 13.5-35V, 4-20mA | Shorter immersion length |
| QAE2164.015 | 150 mm, AC/DC supply, 4-20mA | Supports AC 24 V supply |
| ALT-SB150 | Brass thermowell, G½", PN10 | Protective sleeve (standard) |
| ALT-SS150 | Stainless steel thermowell, G½", PN16 | Higher pressure rating |
| AQE2102 | Clamping nipple, G½" | For PN16 installation without thermowell |
Important: The thermowell/protective sleeve is not included with the sensor. For installation in pressurized pipes, a thermowell (e.g., ALT-SB150 or ALT-SS150) or clamping nipple (AQE2102) must be ordered separately .
1 × Siemens QAE2174.015 Immersion Temperature Sensor (150 mm)
Note: Thermowell, mounting hardware, and connecting cable are sold separately.
In Stock – Ready to ship immediately
Genuine Siemens Product – Factory original Symaro component, PM300 Active status
Warranty Included – Purchase with confidence
Technical Support – HVAC sensor compatibility assistance available
Q1: What is the Siemens QAE2174.015?
It is an active immersion temperature sensor for measuring water temperature in pipes and tanks. It provides a 4…20 mA output proportional to temperature over a factory-set range of -10…120 °C .
Q2: Does this sensor support AC supply?
No. The QAE2174 series is DC-only (DC 13.5…35 V). For AC/DC supply, the QAE2164 series must be used .
Q3: What is the output signal?
The output is 4…20 mA, linear with temperature, with a maximum load of 500 Ω .
Q4: What is the measuring range?
The factory setting is -10…120 °C. Internal jumpers allow selection of 0…100 °C or 0…70 °C .
Q5: What is the sensing element?
It uses a Pt 1000 Class B element per DIN EN 60 751 .
Q6: Is a thermowell included?
No. The protective sleeve/thermowell is not included and must be ordered separately. The nominal pressure depends on the thermowell used: PN 10 with the standard brass thermowell, PN 16 with the stainless steel variant, or PN 16 with the AQE2102 clamping nipple .
Q7: What is the immersion length?
The immersion length is 150 mm .
Q6: What is the process connection?
The process connection is G ½" .
Q9: What is the protection class?
The sensor is rated IP54 per EN 60529 .
Q10: What is the ambient temperature range?
The operating ambient temperature range is -40…+70 °C .
Q11: What is the net weight and country of origin?
Net weight is 0.149 kg. Country of origin is China .
Q12: What should I verify before ordering?
Always verify the exact part number (QAE2174.015 for 150 mm, DC-only), confirm your control system provides DC 24 V (not AC), ensure the required thermowell or clamping nipple is ordered separately, and check that the 4…20 mA signal is compatible with your controller’s analog input.
امسح ضوئيًا إلى WeChat :
امسح ضوئيًا إلى واتساب :
